GREASE LUBRICATION SYSTEMS
MANUAL GREASE PUMP
These are manually operated Piston type Grease Pumps, which are used for grease lubrications .The grease is injected to the lubrication points under pressure by these pumps.
| Model | Reservoir Capacity | Discharge | Maximum Pressure | Vertical Wall Mounting |
|---|---|---|---|---|
| MLE-GHP - 600 - 2 | 600 gms. | 2cc Per Stroke | 60 Kg. / cm2 | 4 Holes, 7 Dia |
| MLE-GHP -1000 - 4 | 1 Kg. | 4cc Per Stroke | 100 Kg. / cm2 | 4 Holes, 7 Dia |
| MLE-GHP -1500 - 4 | 1.5 Kg.. | 4cc Per Stroke | 100 Kg. / cm2 | 4 Holes, 9 Dia |
SINGLE LINE GREASE LUBRICATION SYSTEM
The single line / Dual line Lubrication System is a perfect system to be used where the lubricating points are more than 20 nos. and are suited at far distance from each other. By this system Grease of Consistency up to NLG 1 –2 can be injected to different points of lubrications in the machine under heavy pressure. These systems are used in Cement Plants, Sugar Plants, Chemical Plants, Earth Moving Equipment, Mining Machineries, Coal and Mineral Industry, Mills and Crushers etc.
| MODEL | MLE SGL-30 | MLE SGL-50 | MLE SGL-70 | MLE SGL-100 |
|---|---|---|---|---|
| Reservoir capacity | 10 Kg. | 30 Kg. | 50 Kg. | 70 Kg. |
| Delivery Pressure Max. | 250 Kg/cm2 | 250 Kg/cm2 | 250 Kg/cm2 | 250 Kg/cm2 |
| Grease grade | NLGI - l / lI | NLGI - l / lI | NLGI - l / lI | NLGI - l / lI |
MULTI POINT RADIAL LUBRICATOR
The Radial Lubricating system is used for ejecting predetermined lubricant whether it is soft grease or thick oil under pressure to different points of the lubrication. The system is used for machinery such as Cement Plants, Sugar Plants, Textiles Plants, Rubber Processing Plants, Chainsaw machine, Presses and Hammers.
| MODEL | MLE RL-01-05 | MLE RL-02-09 | MLE RL-03-15 | |||
|---|---|---|---|---|---|---|
| Reservoir Capacity | 5 Ltrs. | 9 Ltrs. | 15 Ltrs. | |||
| No. of pump elements | 8 Pump elements Max | 10 Pump elements Max. | 20 Pump elements Max. | |||
| Discharge of Pump/cycle (Adj.) | 0.10 to 0.25-cc (Max. 6 gm/minute) per pump element. | 0.10 to 0.25-cc (Max. 6 gm/minute) per pump element. | 0.10 to 0.25-cc (Max. 6 gm/minute) per pump element. |
|||
| Gear Box reduction ratio | 70:1 | 70:1 | 70:1 | |||
| Power of motor Motor rpm | 0.25- H.P. 415 Volt AC, 3 Phase 1440 rpm syn. | 0.50- H.P. 415 Volt AC, 3 Phase 1440 rpm syn. | 0.5-1.0- H.P. 415 Volt AC, 3 Phase 440 rpm syn |
|||
| Working Pressure Oil/Grease | 200/300 Kg/cm2 Maximum. | 200/300 Kg/cm2 Maximum. | 200/300 Kg/cm2 Maximum. | |||
DUAL LINE GREASE LUBRICATION SYSTEM
The single line / Dual line Lubrication System is a perfect system to be used where the lubricating points are more than 20 nos. and are suited at far distance from each other. By this system Grease of Consistency up to NLG 1 –2 can be injected to different points of lubrications in the machine under heavy pressure. These systems are used in Cement Plants, Sugar Plants, Chemical Plants, Earth Moving Equipment, Mining Machineries, Coal and Mineral Industry, Mills and Crushers etc.
| MODEL | MLE DGL-30 | MLE DGL-50 | MLE SGL-70 | MLE SGL-100 |
|---|---|---|---|---|
| Reservoir capacity | 30 Kg. | 50 Kg. | 70 Kg. | 100 Kg. |
| Max. Discharge | 250 gm/min. | 250 gm/min. | 250 gm/min. | 250 gm/min. |
| Delivery Pressure Max. | 250 Kg/cm2 | 250 Kg/cm 2 | 250 Kg/cm 2 | 250 Kg/cm2 |
| Grease grade | NLGI - l / lI | NLGI - l / lI | NLGI - l / lI | NLGI - l / lI |
PLUNGER PUMPS (PUMPING UNIT)
Plunger pump is a compact pump that gives metered amount of lubricant in every stroke. We can adjust the discharge by adjusting screw. Output can very from 0.05cc to 0.25cc/stroke & delivery pressure 200 Kg/cm2 max. The stroke of the plunger remains always same. The mounting threads of the plunger is M22×1.5. Plunger pump is also available in 0.50cc/stroke, 0.70cc/stroke & 1.6cc/stroke (Non adjustable).
PROGRESSIVE DISTRIBUTOR BLOCKS
Progressive distributor blocks are meant for distribution of grease/oil delivered by a pump. From this progressive block, we get lubricant sequentially one after another. Any one outlet is blocked then the progressive block will stop functioning. with suitable monitoring devices, this blockages is sensed and suitable warning is given to avoid running the machine without proper lubrication. These blocks can be used for intermittent / continuous lubrication. This block has three type of elements.
PNEUMATIC GREASE PUMPS
| MODEL | MLE PnGP-1500-10 | MLE PnGP-3000-12 | MLE PnGP-5000-15 |
|---|---|---|---|
| Reservoir capacity | 1.5Kg. | 3 Kg. | 5 Kg. |
| Discharge/Storke | 0-10 grams (Adj.) | 0-12 grams (Adj.) | -15 grams (Adj.) |
| Delivery Pressure Max. | 150 Kg/cm2 | 120 Kg/cm2 | 1000 Kg/cm2 |
| Input Pressure | 5-7 Kg/cm2 | 5-7 Kg/cm2 | 5-7 Kg/cm2 |
HAND OPERATED MOBILE GREASE FILLING SYSTEM
| MLE HGS-5 | (Reservoir Cap.-5 Kg.) Discharge-8 gms per stroke,Max. Pr.-100Kg/Cm², with Rubber hose & grease adopter | ||
|---|---|---|---|
| MLE HGS-10 | (Reservoir Cap.-10 Kg.) Discharge-10 gms per stroke,Max. Pr.-125Kg/Cm², with Rubber hose & grease adopter. | ||
| MLE HGS-20 | (Reservoir Cap.-20 Kg.) Discharge-10 gms per stroke Max. Pr.-150Kg/Cm², with Rubber hose & grease adopter | ||
AIR OPERATED MOBILE GREASE FILLING SYSTEM
| MLE GFS-25 (Mobile) | Reservoir Cap.-25 Kg. Discharge-300 to 400 gms per minute,Max. Pr.-125 Kg/Cm². with rubber hose,Grease gun & Trolley mounted. | ||
|---|---|---|---|
| MLE GFS-50 (Mobile) | Reservoir Cap.-50 Kg. Discharge-300 to 400 gms per minute,Max. Pr.-125 Kg/Cm². with rubber hose,Grease gun & Trolley mounted | ||
| MLEGFS-200 | Suitable for drum Cap.-200 Kg, Discharge-300 to 400gms perminute, Max. Pr.-150Kg/Cm², Air input pressure 5-7 Kg/Cm². Withrubber hose & grease gun. This pump is suitable for transfer thegrease with greater discharge. | ||
MOTORISED MOBILE GREASE FILLING SYSTEM
| MLE GFS-25 (Mobile) | Motor 0.25 HP., 1440 rpm. 440V. AC Three PhaseReservoir Cap.-15 Kg. Discharge-04 Kg per hours,Max. Pr.-125 Kg/CM2 . with Trolley mounted. | |
|---|---|---|
| NOTE:- Reservoir Capacity Provided as per customer requirement. | ||
OIL FEEDER (with solenoid valve)
MODEL-MLE OF – 2700 / S.V
Reservoir capacity 2.7 Kgs.
GREASE FEEDER
MODEL-MLE GF – 500
Reservoir capacity 100, 250, 500gms.
12/24V DC RADIAL LUBRICATOR
MODEL-MLEDCRL-2-3, 5-3
Reservoir Capacity 5 Ltrs, number of plunger pump- 3, Discharge 0 to 0.25 ccper stroke/ Element (Adj.), Max. Pressure100 Kg/Cm², 12V DC/ 24V DC input supply.